Table of Contents
Advertisement
The following table describes the parameters and buttons in this page:
Field
Direction
LAN ACL
IP Address
Services Allowed
Add
Reset
Set direction of the data packets to WAN, the page as shown in the following figure appears.
Select the router interface. You can select LAN or WAN. In
this example, LAN is selected.
Enable or disable ACL. You need to enable it, if you want to
use ACL and configure the parameters.
Enter the IP address of the specified interface. Only the IP
address that is in the same network segment with the IP
address of the specified interface can access the router.
You can select the following services from LAN or WAN:
Web, Telnet, FTP, TFTP, SNMP, or PING. You can also
select all the services.
After setting the parameters, click it to add the Current ACL
Table.
Click it to refresh this page.
84
www.encore-usa.com
Description
Advertisement
Table of Contents
