Encore ENDSL-4R5G User Manual page 50

Hide thumbs Also See for ENDSL-4R5G:

Table of Contents

Field

Key

Set the encryption to WPA (TKIP), the page as shown in the following figure appears.

The following table describes the parameters of WPA (TKIP) encryption:

Field

Enterprise (RADIUS)

Personal

(Pre-Shared Key)

For the parameters of WPA (AES), WPA2 (TKIP), WPA2 (AES), and WPA2 Mixed refer to the

parameter description of WPA (TKIP).

(13 characters) or Hex (26 characters).

The encryption key is used to encrypt the data. Both the

router and wireless stations must use the same encryption

key for data transmission.

 If you select 64-bit and ASCII (5 characters), enter any

5 ASCII characters.

 If you select 64-bit and Hex (10 characters), enter any

10 hexadecimal characters.

 If you select 128-bit and ASCII (13 characters), enter

any 13 ASCII characters.

 If you select 128-bit and Hex (26 characters), enter

any 26 hexadecimal characters.

If you select it, you need to enter the port, IP address, and

password of the Radius server. You need to enter the user

name and password provided by the Radius server when

the wireless client connects the router.

If you select it, you need to enter the pre-shared key in the

Pre-Shared Key field.

www.encore-usa.com

Description

Table of Contents