Table of Contents
Advertisement
Field
Radio Power
(Percent)
Show Active Clients
Click Show Active Clients, the page as shown in the following figure appears. This table shows
information of the wireless clients that connect to the router, including MAC addresses,
transmitted packets, received packets.
available, which depends on the geographical area. You
may have a choice of channels (for your region) and you
should use a different channel from an adjacent AP to
reduce the interference. Interference and degrading
performance occurs when radio signal from different AP's
overlaps.
Select a channel from the drop-down list.
Select the transmission power of the radio signal. It is
recommended to select the default value 100%.
Click it to view the information of the wireless clients that
are connected to the router.
64
www.encore-usa.com
Description
Advertisement
Table of Contents
