Table of Contents
Advertisement
(6)
I forgot my password.
Answer. Reset the Wireless ADSL 2+ Modem Router to factory default by pressing the
Reset button for 5~10 seconds and then releasing it.
If you are still getting prompted for a password when saving settings, then perform the
following steps:
1.
Access the Wireless ADSL 2+ Modem Router's web-based utility by going
to http://192.168.1.1 or the IP address of the Wireless ADSL 2+ Modem
Router. Enter the default username and password admin, and click the
Tools – User Management tab.
2.
Enter a different password in the Wireless ADSL 2+ Modem Router
Password field, and enter the same password in the second field to confirm
the password.
3.
Click the Submit button then click SAVE button to activate your setting.
(7)
What is MAC Address?
Answer. The MAC is short for Media Access Control Address. It is a hardware address that
uniquely identifies each node of an Ethernet networking device. This address is usually
permanent.
(8)
What is NAT (Network Address Translation) and what is it used for?
Answer. NAT translates multiple IP Addresses on the private LAN to one public IP Address
(in WAN) that is connected to the Internet. NAT adds a level security since the IP address of a
computer connected to the private LAN is never transmitted on the Internet.
(9)
What can I do when I am not able to get the web configuration page shown for
this Wireless ADSL 2+ Modem Router?
Answer. Remove the proxy settings on your Internet Browsers or remove the dial-up
settings on your browser.
(10)
What is DMZ (De-Militarized zone)?
Answer. DMZ allows one IP Address (computer) to be exposed to the Internet. Some
applications require multiple TCP/IP ports to be opened. It is recommended that you set your
computer with static IP address if you want to use DMZ features. And, be aware to add extra
protection and security to the computer exposed.
106
www.encore-usa.com
Advertisement
Table of Contents
