Chapter 1
Introduction to NI-Motion
Software and Hardware Interaction
Measurement and
Automation Explorer
Configuration Utility
Note
The last block in Figure 1-1 is not applicable to the NI SoftMotion Controller.
NI Motion Controller Architecture
NI-Motion User Manual
Application Development Environments:
NI-Motion Driver Software
NI Motion Controller
Figure 1-1. NI Motion Control Hardware and Software Interaction
This section includes information about the architecture for both the 73xx
family of NI motion controllers and the NI SoftMotion Controller.
NI 73xx Architecture
NI 73xx controllers use a dual-processor architecture. The two processors,
a central processing unit (CPU) and a digital signal processor (DSP), form
the backbone of the NI motion controller. The controller plugs into a
variety of slots, including PCI slots, or to a PC using a high-speed serial
interface, such as IEEE 1394 (FireWire
NI Motion Assistant
Graphical Prototyping Tool
Creates ADE
LabVIEW, Visual Basic, and C++
®
).
1-2
Code
ni.com