Table of Contents
Advertisement
Setting a System Password
Complete the following steps to set a system password.
Setting a system password is optional.
Note
The default username for the NI-7932R is
Note
password for the NI-7932R, so you must leave the password field blank when
logging in until you set a system password.
1.
Right-click your system and select Web Configuration.
The NI Web-Based Configuration and Monitoring utility opens in your default browser
and is where you set the password. If you have not installed Microsoft Silverlight,
NI Web-based Configuration & Monitoring prompts you to do so.
Enter a unique name for your system in the Hostname field.
2.
3.
Click the Security Configuration icon.
Click Login.
4.
5.
In the Login dialog box, enter the username
6.
Click OK.
Click Change Password.
7.
8.
Enter and re-enter a new password.
Click OK.
9.
10. Click Save.
11. Click OK to confirm you are changing the password.
Caution
you must contact NI and reformat the controller.
Installing Software on the NI-7932R
1.
Open Measurement & Automation Explorer (MAX).
2.
Expand the system under Remote Systems by clicking the arrow beside it.
3.
Select Software.
4.
Click Add/Remove Software at the top of the Software tab to launch the LabVIEW
Real-Time Software Wizard.
Note
5.
Select a recommended software set to install.
6.
Click Next.
10 | ni.com | NI-7932R Getting Started Guide
NI cannot recover lost system passwords. If you forget the password,
A login window appears if you set a system password.
. There is no default
admin
and leave the password field blank.
admin
Advertisement
Table of Contents
