Blend After First Move Is Complete - National Instruments NI-Motion User Manual

Blend after First Move Is Complete

© National Instruments Corporation
Blending moves after the first move is complete causes the first move
segment to come to a complete stop before starting the profile of the second
segment, as shown in Figure 9-3.
Velocity
1 Blending Starts
Figure 9-3. Blending after Move Complete
This type of blending is useful if you want to start two move segments, one
after the other, with no delay between them.
1 2
2 Blend is Complete
9-3
Chapter 9 Blending Moves
Time
NI-Motion User Manual