Current Hardware Switch Settings; Labview Rt Configuration Overrides Submenu; Boot Menu - National Instruments NI PXI-8109 User Manual

Boot Menu

© National Instruments

Current Hardware Switch Settings

This submenu displays the current values of the LabVIEW RT
configuration switches, indicating Boot Configuration, Reset IP Address,
and Disable Startup VI switch status. For more information on these
settings and the switches that control them, refer to the
Configuration Switches

LabVIEW RT Configuration Overrides Submenu

In order to minimize jitter when booting into LabVIEW Real-Time mode,
the following features are automatically disabled. These features can be
manually enabled. Refer to the
details on what each feature enables.
• CPU Hyper Threading—The default is Use RT Default.
• CPU C-States—The default is Use RT Default.
Use this menu to configure settings related to the boot process and boot
device priority.
• Boot Settings Configuration—Use this setting to access the Boot
Settings Configuration submenu. Refer to the
Configuration Submenu
• SCSI Drive Boot—This setting specifies whether or not boot support
is enabled for legacy mass storage devices, such as SCSI drives. When
enabled, legacy mass storage controllers with boot support will be
displayed in the Boot Option Priorities menu. The default value is
Enabled.
• PXE Network Boot—This setting specifies whether or not the PXE
network boot agent is enabled. When enabled, the Intel Boot Agent
will be displayed in the Boot Option Priorities menu, allowing you to
boot from a PXE server on the local subnet. Note that the Intel Boot
Agent device names are preceded by IBA GE Slot in the Boot Option
Priorities menu. The system must be restarted for this setting to take
effect. The default value is Disabled.
Boot Option Priorities—These settings specify the order in which the
•
BIOS checks for bootable devices, including the local hard disk drive,
removable devices such as USB flash disk drives or USB CD-ROM
drives, or the PXE network boot agent. The BIOS will first attempt to
boot from the device associated with Boot Device #1, followed by
Boot Device #2, and Boot Device #3. If multiple boot devices are not
present, the BIOS setup will not display all of these configuration
Chapter 2
section of this chapter.
CPU Configuration Submenu
section for more information.
2-13
Installation and Configuration
LabVIEW RT
for specific
Boot Settings
NI PXI-8109 User Manual