Output Option Copy; Picture 44: Output Option Copy - Image Access Bookeye Color Operation Manual

9.5.3

Output Option Copy

This output option prints directly to a previously installed network printer. The
key is used to configure the remotely connected printer.
Remote Printer
Printer Preset
Address
Port (9100)
Connection Timeout
Data Format
Resolution
Paper Format (Postscript)
Duplex Print
Paper Feed
Operation Manual

Picture 44: Output Option Copy

Description
Choose a printer configuration out of five possible set of
parameters. If you click on "Change Name" you can change
the name of this set.
Enter the IP address of the remote printer.
Enter the IP port of the remote printer. Default is port 9100.
Choose the timeout for connecting to the remote printer
before the connection is aborted.
Choose the data format of the remote printer. Selectable
are Postscript, Postscript
communication and HP DesignJet (HP/RTL) compliant
printers. Changing the data format will change some of the
options in this configuration window.
Select the printing resolution. If an exact 1:1 copy of the
scanned document is required, the scanning resolution and
printing resolution must match.
Choose the paper format for postscript printer output.
Switch on/off printing both sides of a paper sheet (duplex).
Select the paper feed method for the remote printer. The
menu may contain manual paper feed, various paper trays
and paper rolls.
(Option)
with framing HP/PJL
Page 49