C.3 Warnings - Image Access WideTEK 42 Manual

C.3 Warnings
Warning Warning shown in the
# display
83 Scan background was
changed
144
145 Camera adjustment required Camera adjustment
160 W160 NO WHITE BALANCE
DATA
180
181
182
C.4 Information
Infor- Information shown in the
mation display
#
200 CREATING
RECOVERY PART..
Manual
Warning sent to
application
Scan background was
changed
Light level is low
required
No white balance data
Deskew failed
Stitching2D: out of
memory. Using fixed
stitching
Stitching2D: bad
matching. Using fixed
stitching
Information sent to
application
Creating Recovery
Partition
Problem description
The background was changed. Repeat
scan sequence to correct the measured
value. Warning will disappear.
The light level is found to be low during
the white balance function.
General information about the camera
adjustment. Check for details and
readjust.
No white balance data was found.
Perform white balance.
The deskew function failed. Reposition
document.
There is not enough memory available
to complete the stitching function.
2D stitching can not deliver a matching
result. Switch to "Fixed" stitching.
Description
While creating the recovery partition, the
scanner can not be accessed.
Page 105