Suzuki GSF1200S 2001 Service Manual page 55

• Remove the clutch pressure plate lifter 1 by removing the circlip.
( 09900-06108: Snap ring pliers
• After removing the clutch pressure plate lifter, remove the thrust
washer 2, bearing 3 and clutch push piece 4, and pull out
the clutch push rods, 5 and 6.
NOTE:
If it is difficult to pull out the push rod 5 , use a magnetic hand or
wire.
• Hold the clutch pressure plate with the special tool and loosen
the clutch sleeve hub nut.
( 09920-34820: Clutch pressure plate holder
• After removing the clutch sleeve hub nut, remove the lock
washer 7.
• Remove the clutch diaphragm spring holder 8 by removing
the screws.
ENGINE 3-17