Suzuki GSF1200S 2001 Service Manual page 84

3-46 ENGINE
• Each camshaft journal holder is identified with an embossed letter. Install the dowel pins into each cam-
shaft journal holder.
• Fasten the camshafts (IN and EX) evenly by tightening the camshaft journal holder bolts sequentially and
in a crisscross pattern.
NOTE:
Damage to the cylinder head or camshaft journal holder thrust surfaces may result if the camshaft journal
holders are not tightened evenly.
• Tighten the camshaft journal holder bolts to the specified torque.
" Camshaft journal holder bolt: 10 N . m (1.0 kgf . m, 7.0 lb-ft)
$
The camshaft journal holder bolts are made of a special material and much superior in strength,
compared with other types of high strength bolts.
Take special care not to use other types of bolts instead of these special bolts. To identify these
bolts, each of them has a "9" on its head.
Front