Suzuki GSF1200S 2001 Service Manual page 70

3-32 ENGINE
• Install the left oil pipe 1.
• Install a new O-ring 2 and shim 3.
• Install a new gasket and the oil sump filter 4.
$
Replace the gasket and O-ring with new ones to prevent
oil leakage.
• Install a new gasket and the oil pan. Tighten the oil pan bolts to
the specified torque.
" Oil pan bolt: 14 N . m (1.4 kgf . m, 10.0 lb-ft)
$
Replace the oil pan gasket with a new one to prevent oil
leakage.
NOTE:
Install a new gasket washer A to the oil pan bolt as shown.
$
Use a new gasket washer to prevent oil leakage.
• Install the countershaft bearing retainer 5.
NOTE:
Apply a small quantity of THREAD LOCK "1342" to the two screws.
# 99000-32050: THREAD LOCK "1342"
• Install the gear position switch.
NOTE:
When installing the gear position switch, be sure to install the spring
6 , switch contact 7 and O-ring 8 properly.
$
Replace the O-ring with a new one.