Suzuki GSF1200S 2001 Service Manual page 56

3-18 ENGINE
• Remove the clutch diaphragm springs 1, clutch diaphragm
spring seat 2 and clutch pressure plate 3.
• Remove the clutch drive and driven plates along with the clutch
sleeve hub.
• Remove the thrust washer 4.
• With the spacer and bearing removed, the primary driven gear
(integral with the clutch housing) is free to disengage from the
primary drive gear.
• Remove the primary driven gear assembly with the generator/
oil pump drive gears.
• Remove the thrust washer 5.
• Remove the circlip and washer from the gearshift shaft.
( 09900-06107: Snap ring pliers