Suzuki GSF1200S 2001 Service Manual page 183

FORK SPRING
• Install the fork spring as shown.
NOTE:
The smaller pitch A should face to the bottom of the front fork.
INNER ROD AND LOCK NUT
• Install the special tool and pull up the inner rod.
% 09940-52840: Front fork inner rod holder
• Install the front fork cap.
NOTE:
Before installing the front fork cap, turn the inner rod lock nut 1
completely to the lower position as shown in the photograph.
• Tighten the lock nut to the specified torque.
" Lock nut: 20 N . m (2.0 kgf . m, 14.5 lb-ft)
• Install the O-ring to the front fork cap bolt.
• Apply fork oil lightly to the O-ring.
#
Use a new O-ring to prevent oil leakage.
• Install the front fork cap bolt to the inner tube temporarily.
CHASSIS 5-19
0 mm 0 mm