Suzuki GSF1200S 2001 Service Manual page 160

4-22 FUEL SYSTEM
CARBURETOR ENGAGEMENT
• Position the throttle valve control lever 1 between the throttle
valve synchronizing screw and spring as shown.
• Apply thin coat of the grease "A" to the fuel joint pipe O-rings.
( 99000-25010: SUZUKI SUPER GREASE "A"
#
Replace the O-ring with a new one.
• Place the carburetor assembly on the surface plate (engine
side downward) and tighten the upper and lower carburetor set
shafts to the specified torque.
% Carburetor set shaft: 5.0 N . m (0.5 kgf . m, 1.5 lb-ft)
CARBURETOR HEATER
• Apply thermo-grease to the threads and tighten the carburetor
heater. (Only for E-02)
) 99000-59029: THERMO-GREASE
% Carburetor heater: 3 N . m (0.3 kgf . m, 2 lb-ft) % % % %