3-76
ENGINE
Driveshaft assembly
• Align the bushing oil hole 1 with the shaft oil hole 2.
• With the lock washer turned in its groove A, align the cutout B
of the lock washer with the tab C on the gear bushing.
• Install the spacer 3 after installing the O-ring 4.
Countershaft assembly
• Align the bushing oil hole 1 with the shaft oil hole 2.
• With the lock washer 3 turned in its groove A, align the cutout
B of the lock washer 3 with the tab C on the lock washer 4.