AMX NXD-1000Vi Operation/Reference Manual page 61

FIG. 41 Wireless Settings page - Static WEP security method




5.
Toggle the Encryption field (FIG. 41) until it reads either: 64 Bit Key Size or 128 Bit Key Size.
The 64/128 selection reflects the bit-level of encryption security. This WEP encryption level must match
the encryption level being used on the WAP.
WEP will not work unless the same Default Key is set on both the panel and the
Wireless Access Point.
For example: if you have your Wireless Access Point set to default key 4 (which
was 01:02:03:04:05), you must set the panel's key 4 to 01:02:03:04:05.
6.
Toggle the Default Key field until the you've chosen a WEP Key value (from 1- 4) that matches what
you'll be using on your target WAP200G. This value MUST MATCH on both devices.

7.
With the proper WEP Key value displayed, press the Generate button to launch the WEP Passphrase
keyboard.
If you are wanting to have your target WAP (other than an NXA-WAP200G) generate the Current Key
- Do not press the Generate button and continue with Step 13.

The code key generator on Modero panels use the same key generation formula.
Therefore, this same Passphrase generates identical keys when done on any
Modero because they all use the same Modero-specific generator. The Passphrase
generator is case sensitive.
8.
Within this on-screen WEP Passphrase keyboard (FIG. 42), enter a character string or word (such as
AMXPanel) and press Done when you have finished.
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom
The card should be given the SSID used by the target WAP. If this field is left blank, the unit will
attempt to connect to the first available WAP. By default, all WAP200Gs use AMX as their
assigned SSID value.
One of the most common problems associated with connection to a WAP arise because the SSID
was not entered properly. You must maintain the same case when entering this information. ABC is
not the same as Abc.
The alpha-numeric string is by default AMX but can later be changed to any 32-character entry.
This string must be duplicated within the Network Name (SSID) field on the WAP.
As an example, if you use TECHPUBS as your SSID, you must match this word and the case
within both the Network Name (SSID) field on the touch panel's Network Name SSID field and on
the WAP's Basic Wireless Configuration page.
These WEP Key identifier values must match for both devices.
This keyboard allows you to enter a Passphrase (such as AMXPanel) and then AUTOMATICALLY
generate a WEP key which is compatible only among all Modero panels.
Required Information:
- SSID (Network Name used by the Target WAP)
- Encryption Method
- Passphrase
- WEP Key assignment
- Authentication Method
Configuring Communication
47