Installing The Nxa-Avb/Ethernet - AMX NXD-1000Vi Operation/Reference Manual

NXA-AVB/ETHERNET Breakout Box
NXA-AVB/ETHERNET Product Specifications (Cont.)
Included Accessories:
Other AMX Equipment:

Installing the NXA-AVB/ETHERNET

A 12 VDC-compliant power supply can indirectly provide power to a Modero panel by routing power through
the NXA-AVB/ETHERNET Breakout Box. FIG. 4 shows a sample wiring configuration using both an indirect
or direct power connection for a video-capable Modero panel.
Indirect
Connect
12 VDC power
supply
supplied via
NXA-AVB box
12 VDC power
supply
Direct
Connect
FIG. 4 Sample wiring configuration on video-capable panels using this breakout box
A 12 VDC-compliant power supply can also directly provide power through the unit to a target Modero panel.
FIG. 5 shows a sample wiring configuration for a non-video capable Modero panel.
Direct
connect
12 VDC power
supply
FIG. 5 Sample wiring configuration using non-video capable Modero panels
The breakout box unit can be mounted on either a horizontal flat surface or into an
equipment rack (by removing the front screws and attaching it to an optional AC-RK).
The power supply being used on the NXA-AVB/ETHERNET is dependant on the
power requirements of the target touch panel.
Use a standard CAT5 Ethernet cable to provide both communication and 10/100 network connectivity between
the panel, NXA-AVB/ETHERNET, NetLinx Master, and the network.
8
• Two 2-pin Phoenix connectors (41-5025)
• 4-pin Phoenix connector (41-5047)
• 6-pin Phoenix connector (41-5063)
• Rack Mount Kit (KA2250-40) with mounting bracket (62-2254-02)
• AC-RK Accessory RackMount Kit (FG515)
• Modero Table Top Cable (CA2250-50)
Ethernet In
(RJ-45)
Video In
(BNC)
NXA-AVB/ETHERNET
Breakout Box
Power
Ethernet
(CAT5)
or
NXD/T Video-capable
Touch Panels
Ethernet
(CAT5)
NXD/T Non-video capable
Touch Panels
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom
Line Level out
Mic Out
(to amplifier
(4-pin captive-wire)
or VOL card)
Audio In
(6-pin captive-wire)
(rear)
(front)
Audio/Video
(CAT5)
Audio (CAT5)
between the
NXA-AVB/ETHERNET
Breakout Box