Input Commands; Cal; Kps; Mbt - AMX NXD-1000Vi Operation/Reference Manual

Programming

Input Commands

These Send Commands are case insensitive.
Input Commands

^CAL

^KPS

^MBT

^MDC

176
Put panel in calibration mode.
Syntax:
"'^CAL'"
Example:
SEND COMMAND Panel,"'^CAL'"
Puts the panel in calibration mode.
Set the keyboard passthru.
• The parameters within this command accept keystrokes from an attached USB
keyboard or Virtual keyboard.
Syntax:
"'^KPS-<pass data>'"
Variables:
pass data:
<blank/empty> = Disables the keyboard.
0 = Pass data to G4 application (default). This can be used with VPC or text areas.
1 - 4 = Not used.
5 = Sends out data to the Master.
Example:
SEND COMMAND Panel,"'^KPS-5'"
Sets the keyboard passthru to the Master.
Option 5 sends keystrokes directly to the Master via the Send Output String mechanism.
This process sends a virtual keystroke command (^VKS) to the Master.
Example 2:
SEND COMMAND Panel,"'^KPS-0'"
Disables the keyboard passthru to the Master.
Set the mouse button mode for the virtual PC.
Syntax:
"'^MBT-<0-3>'"
Variables:
0 = None.
1 = Left.
2 = Middle.
3 = Right.
Example:
SEND COMMAND Panel,"'^MBT-1'"
Sets the mouse button mode for the virtual PC to LEFT.
Set the mouse double click ON for the virtual PC.
Syntax:
"'^MDC'"
Example:
SEND COMMAND Panel,"'^MDC'"
Enables the double click for the virtual PC.
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom