Skt; Tec; Tef; Top - AMX NXD-1000Vi Operation/Reference Manual

Programming
"^" Button Commands (Cont.)

^SKT

^TEC

^TEF

^TOP

Enables/disables
touch output to
Master
160
Receive touch information on specified socket.
Syntax:
'^SKT-<0=disable socket, greater than 1023=enable socket on specified port>
• Only socket values equal to or greater than 1024 are valid.
• The panel will open up a TCP listening socket on the port specified.
• User or 3rd party program can connect to the panel using this port/socket number and
receive touch/release/move strings.
• By default, the panel disables touch notifications on startup.
Format of the output is:
<Press/Release/Move>,<x-coordinate>,<y-coordinate>
Example:
send_command TP, '^SKT-7425' (enables touch notifications on socket 7425)
send_command TP, '^SKT-0' (disable touch notification)
Set the text effect color for the specified addresses/states to the specified color.
• The Text Effect is specified by name and can be found in TPD4.
• You can also assign the color by name or RGB value (RRGGBB or RRGGBBAA).
Syntax:
"'^TEC-<vt addr range>,<button states range>,<color value>'"
Variables:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
color value = Refer to theRGB Values for all 88 Basic Colors table on page 139.
Example:
SEND_COMMAND Panel,"'^TEC-500.504&510.515,1&2,12'"
Sets the text effect color to Very Light Yellow on buttons with variable text 500-504
and 510-515.
Set the text effect.
The Text Effect is specified by name and can be found in TPD4.
Syntax:
"'^TEF-<vt addr range>,<button states range>,<text effect name>'"
Variables:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
text effect name = Refer to the Text Effects table on page 162 for a listing of text effect
names.
Example:
SEND_COMMAND Panel,"'^TEF-500.504&510.515,1&2,Soft Drop Shadow 3'"
Sets the text effect to Soft Drop Shadow 3 for the button with variable text range 500-504
and 510-515.
If enabled, Press/Move/Release events are sent to the Master as string events.
Syntax:
"'^TOP-<state>'"
<state> is 0(disable) 1(presses/releases), 2(moves), 3(press/move/release).
Note: Move should be used with caution. This setting can generate a significant amount of
traffic to the master depending on user interaction.
Example command: "'^TOP-1'"
Example Response: "String Event: Text: Press,320,480"
Example Response: "String Event: Text: Release,320,480"
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom