AMX NXD-1000Vi Operation/Reference Manual page 79

The panel firmware is shown on the right of the listed panel.
4.
If the panel firmware being used is not current, download the latest Kit file by first logging in to
www.amx.com and then navigate to Tech Center > Firmware Files and from within the Modero section
of the web page locate your Modero panel.
The latest NXD-1000Vi firmware kit file is now panel-specific.
Only NXD-1000Vi firmware should be loaded onto this specific panel type.
This new firmware also provides both backwards compatibility with the previous
802.11b cards and new security protocols for the new 802.11g wireless CF card.
5.
Click on the desired Kit file link and after you've accepted the Licensing Agreement, verify you have
downloaded the Modero Kit file to a known location.
6.
From within Studio, select Tools > Firmware Transfers > Send to NetLinx Device from the Main menu
to open the Send to NetLinx Device dialog (FIG. 59). Verify the panel's System and Device number
values match those values listed within the System folder in the OnLine Tree tab of the Workspace
window.
FIG. 59 Send to NetLinx Device dialog (showing Modero firmware update via IP)
7.
Select the panel's Kit file from the Files section (FIG. 59).
8.
Enter the Device value associated with the panel and the System number associated with the Master
(listed in the OnLine Tree tab of the Workspace window). The Port field is greyed-out.
9.
Click the Reboot Device checkbox. This causes the touch panel to reboot after the firmware update
process is complete. The reboot of the panel can take up 30 seconds after the firmware process has
finished.
10.
Click Send to begin the transfer. The file transfer progress is indicated on the bottom-right of the dialog
(FIG. 59).
11.
Click Close (after the panel reboots) to return to the main program.
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom
Selected Firmware file
Device and System values
listed in the Workspace window
must match the System and Device values
Upgrading Modero Firmware
Description field for
selected Kit file
Firmware download
status
65