AMX NXD-1000Vi Operation/Reference Manual page 16

Introduction







These Color Video (CV) panels display NTSC/PAL/SECAM video formats within variable sized windows.
They include a built-in microphone, speaker, audio/headphone connector, and two NetLinx programmable
pushbuttons (available on NXD models only when mounted with included Button Trim Ring).
Each panel is sold only as part of a kit which includes both a panel and an NXA-AVB/ETHERNET Audio/
Video Breakout Box (FG2254-10). This box facilitates the installation and distribution of video (either
Composite or S-Video), data (via Ethernet), and audio to Modero touch panels located up to 200 feet (60.96 m)
from the breakout box. NXD-1000Vi panels are ideally suited for displaying full motion video and audio with
overlay graphics for applications with demanding visual requirements.
NXD-1000Vi 10" Widescreen Video Touch Panel Kits
NXD-1000Vi
(FG2259-04)
The NXD-1000Vi panel (FG2259-04) is shipped, by default with a Trim Ring
containing buttons, but the end user can later install the included Trim Ring without
button openings.
Key features include:







2
G.711 telephone-voice-quality sound (70 dB SPL @ 1 meter)
Supports analog stereo audio, Composite Video and S-Video
Composite/S-Video inputs via NXA-AVB/Ethernet Breakout Box
64 MB SDRAM / 512 MB CompactFlash Memory or more
802.11g WiFi for two-way network communications (optional)
Two bezels included: with and without tactile buttons
Motion Sensor and Light sensor
10" Widescreen Color Video Wall Mount Touch Panel Kit (with buttons)
(includes both an NXD panel and an NXA-AVB/ETHERNET A/V Breakout Box).
NXD-1000Vi panels are based on the latest display technology and support AMX's 4th generation
(G4) graphics which provide higher brightness, richer colors, and deeper contrast. The new G4
graphics technology is supported by the latest AMX TPDesign4 Touch Panel Design program.
NXD-1000Vi panels display eye-catching images and full-motion video on a large 16:9 image
format, while providing a wide 95-degree top-to-bottom viewing angle.
NXD-1000Vi panels feature a front panel light sensor, motion sensor, IR receiver and a Sleep/Setup
Access combo button.
NXD-1000Vi panels are field upgradeable to 802.11g communication via the installation of the new
NXA-WC8011GCF Wi-Fi Card Kit (FG2255-07).
NXD-1000Vi panels support AMX Computer Control, which enables remote viewing and control of
any networked computer directly from the panel. This gives the user the ability to launch digital
music from a PC, cruise the Internet, check and respond to E-mail, open software files, and launch
applications. Anything you can do on your PC can be accomplished through these panels.
The optional wireless solution includes an NXA-WC80211GCF internal Wi-Fi card that allows the
NXD-1000Vi to communicate with a NetLinx Master via a standard 802.11g Wireless Access
Point, and an NXA-BASE/1 battery base kit that allows the NXT to function off the charge from
the included single NXT-BP battery.
NXD-1000Vi panels feature programmable firmware that can be upgraded via either the Ethernet
port, wireless interface card, or the mini-USB port.
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom