Using The Connection Utility - AMX NXD-1000Vi Operation/Reference Manual

Using the Connection Utility

1. Press the Tools button in the Protected Setup Navigation Buttons section. This opens the Tools
menu.
2. Within the Tools menu, press the Connection Utility button. This launches the Connection Utility
popup.
3. Move the panel throughout your wireless network, and changes within the utility. The Connection
Information notes the IP of the connected master and the IP of your panel. The Wireless Information
indicates the current wireless connection method for the panel, e.g., the MAC Address for the WAP
currently in use. The Connection Statistics show the current quality of the panel connection.
4. Push Close when you are done using the site survey tool.
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom
Firmware Pages and Descriptions
121