Amx Certificate Upload Utility; Configuring The G4 Touch Panel For Usb Communication; Step 1: Setup The Panel And Pc For Usb Communication; Step 2: Confirm The Installation Of The Usb Driver On The Pc - AMX NXD-1000Vi Operation/Reference Manual

Appendix D - Wireless Technology

AMX Certificate Upload Utility

The AMX Certificate Upload utility gives you the ability to compile a list of target touch panels, select a
pre-obtained certificate (uniquely identifying the panel), and then upload that file to the selected panel.
This application must be run from a local machine and should not be used from a
remote network location.
This application ensures that a unique certificate is securely uploaded to a specific touch panel. Currently, the
target panels must be capable of supporting the WPA-PSK and EAP-XXX wireless security formats.
The Certificate Upload utility supports the following capabilities:






The Certificate Upload Utility recognizes the following certificate file types:






Configuring the G4 Touch Panel for USB Communication

For a personal computer to establish a connection to a Modero panel via USB, the target computer must have
the appropriate AMX USB driver installed. This installation is bundled into the latest TPDesign4 and NetLinx
Studio2 software setup process or can be downloaded independently from the main Application Files page on
www.amx.com.
Close the Certificate Upload Utility before configuring the touch panel's USB driver.
Only after the panel has been successfully setup to communicate via USB can you
then re-launch the utility.

Step 1: Setup the Panel and PC for USB Communication

1.
If you do not currently have the latest version of TPDesign4, navigate to www.amx.com > Tech Center >
Downloadable Files > Application Files > NetLinx Design Tools section of the website and locate the
AMX USB Driver executable (AMX USBLAN Setup exe).
2.
Download this executable file to a known location on your computer.
3.
Launch the Setup.exe and follow the on-screen prompts to complete the installation.

Step 2: Confirm the Installation of the USB Driver on the PC

The first time each AMX touch panel is connected to the PC it is detected as a new hardware device and the
USBLAN driver becomes associated with it (panel specific).


1.
After the installation of the USB driver has been completed, confirm the proper installation of the large
Type-A USB connector to the PC's USB port, and restart your machine.
210
Ability to browse both a local and network drive to find a desired certificate file.
Ability to create a list of target AMX G4 touch panels based on IP Addresses
Compatible panels include: MVP-8400, MVP-7500, NXD-1000Vi, NXT-CV10, NXD-CV7, NXT-
CV7, NXD-1000Vi, and NXD-1000Vi.
Ability to display the IP Address of the local computer hosting the application.
Ability to load a previously created list of target touch panels.
Ability to save the current list of target Modero panel as a file.
Ability to track the progress of the certificate upload by noting the current data size being
transmitted and any associated error messages (if any).
CER (Certificate File)
DER (Distinguished Encoding Rules)
PEM (Privacy Enhanced Mail)
PFX (Normal Windows generated certificate)
PVK (Private Key file)
Each time thereafter the panel is "recognized" as a unique USBLAN device and the association to
the driver is done in the background.
When the panel is detected for the first time some user intervention is required during the
association between panel and driver.
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom