AMX NXD-1000Vi Operation/Reference Manual page 27

700Vi, 1000Vi, CV7, and CV10 panels only require locating the Compact Flash's metal cover plate on the
main circuit board and then adhering the terminal antenna connector to that location using the included
double-sided adhesive tape.
If the CF metal cover plate is not present over the wireless card slot on a 700Vi,
1000Vi, CV7, or CV10 panel, you can use the adhesive tape to secure the terminal
antenna to the surface of the new card (atop the product label).
The procedures for upgrading a CF card on an MVP is identical for both MVP-7500 and MVP-8400 panels.
The procedures for upgrading/installing the new CF card are also similar across all referenced NXT panels and
NXD panels as a group (differences arise from their housing).
NXA-WC80211GCF Product Specifications
Dimensions (HWD):
Weight:
Description:
Features:
Antenna Type:
Bus Interface:
Certifications:
Media Access Control
Techniques:
Network Architecture:
Operating Channels:
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom
• 0.22" x 1.68" x 2.40" (5.6 mm x 42.80 mm x 61.0 mm)
• 19.50 grams (0.043 lbs)
• Wireless LAN Compact Flash Card with external PIFA antenna.
• Features enterprise-class security such as WPA and WPA2 security.
• Compact Flash Type I form factor
• Enhanced range and throughput
• Features wireless security such as: WPA, WPA2 and WEP
• Field-installable
• Incorporates DSSS and OFDM radio technology
• Operates at ISM frequency bands of 2.4 GHz, while providing data transfer
speeds of up to 54Mbps.
• Support for IEEE 802.11b and 802.11g
• Supports Advanced Encryption Standard (AES) 64-bit and 128-bit data
encryption, along with an Re4 encryption cipher (64/128-bit)
• Supports authentication methods such as: EAP-FAST, EAP-LEAP, EAP-PEAP,
EAP-TLS, and EAP-TTLS
• Supports Wired Equivalent Privacy (WEP) 64-bit and 128-bit data encryption
(known to the on-board firmware as Static WEP)
• External PIFA antenna (factory-installed)
• Compact Flash Type I
• FCC Part 15 Class B, CE, IC, TELEC, and Wi-Fi
• Using 802.11b DSSS communication:
DBPSK @ 1 Mbps
DQPSK @ 2 Mbps
CCK @ 5.5 Mbps
• Using 802.11g OFDM communication:
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
• Infrastructure mode (Client-to-Access Point)
• Using 802.11b & g communication:
- 04: (Ch 10 - 13) - France
- 11: (Ch 1 - 11) - North America
- 13: (Ch 1 - 13) - Europe ETSI
- 13: (Ch 1 - 13) - Japan (802.11g)
- 14: (Ch 1 - 14) - Japan (802.11b)
Note: To alter the card's default country code (North America), please
contact an AMX Technical Support representative for detailed procedures and
information.
NXD-1000Vi Touch Panel Accessories
13