Programming
Touch Panel SIP Commands
The following table lists and describes SIP commands that are sent to the touch panel to manage calls.
SIP Commands
^PHN-ANSWER
^PHN-AUTOANSWER Enables (1) or disables (0) the auto-answer feature on the phone.
?PHN-AUTOANSWER Queries the state of the auto-answer feature.
^PHN-CALL
^PHN-DECLINE
^PHN-DTMF
188
Answers the call.
Syntax:
"'^PHN-ANSWER, <connection id>'"
Variable:
connection id = The identifying number of the connection
Example:
SEND_COMMAND Panel,"'^PHN-ANSWER, 1'"
Syntax:
"'^PHN-AUTOANSWER, <state>'"
Variable:
state = 0 (Disable) or 1 (Enable)
Example:
SEND_COMMAND Panel,"'^PHN-AUTOANSWER, 1'"
Enables the auto-answer feature.
The panel responds with the ^PHN-AUTOANSWER, <state> message.
Syntax:
"'?PHN-AUTOANSWER'"
Example:
SEND_COMMAND Panel,"'?PHN-AUTOANSWER'"
Calls the provided number.
Syntax:
"'^PHN-CALL, <number>'"
Variable:
number = The provided phone number
Example:
SEND_COMMAND Panel,"'^PHN-CALL, 2125551000'"
Declines the incoming call.
Decline (send to voice mail if configured) the incoming call on <CallID> as indicated
from the previous PHN-INCOMING message. CallID should be 0 or 1.
Syntax:
"'^PHN-DECLINE, <CallID>'"
Variable:
CallID = The identifying number of the connection.
Example:
SEND_COMMAND Panel,"'^PHN-DECLINE,0""
Sends DTMF codes.
Syntax:
"'^PHN-DTMF, <DTMF code>'"
Variable:
DTMF code = 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, POUND, or ASTERISK.
Example:
SEND_COMMAND Panel,"'^PHN-DTMF, 1234567879ASTERISK'"
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom