Kubota WSM B2050 Workshop Manual page 75

B2050, B2350, B2650, B3150, WSM
Stopper Magnet Clutch (For A/C Compressor)
Application
• Use for loosen and tighten the magnet clutch mounting nut.
NOTE
• This special tool is not provided, so make it referring to the figure.
A 125 mm (4.92 in.)
B 40 mm dia. (1.57 in. dia.)
C Radius 33 mm (Radius 1.30 in.)
D 16 mm (0.63 in.)
E 120 mm dia. (4.72 in. dia.)
F 12 mm dia. (0.47 in. dia.)
G 3 × M8 × 1.25 All screws
H 4.52 rad (120 °)
I Radius 27 mm (Radius 1.06 in.)
J Radius 50 mm (Radius 1.97 in.)
K Weld all around
L 20 mm (0.78 in.)
M Radius 41 mm (Radius 1.61 in.)
G-54
GENERAL
9Y1210982GEG0081US0
KiSC issued 03, 2014 A