Kubota WSM B2050 Workshop Manual page 433

B2050, B2350, B2650, B3150, WSM
Symptom
Hazard Light (Tail
Light) Does Not Light
Hazard Indicator
Lamp (Turn Signal
Lamp) Does Not Light
Hazard Light (Tail
Light) Does Not
Flicker
Turn Signal Light
Does Not Light
Turn Signal Light
Indicator Lamp Does
Not Light
Turn Signal Light
Does Not Flicker
Probable Cause and Checking Procedure
1. Fuse blown (15 A)
2. Bulb blown
3. Wiring harness disconnected or improperly
connected
4. Flasher unit damaged
5. Hazard switch damaged
1. Bulb blown
2. Wiring harness disconnected or improperly
connected
1. Flasher unit damaged
1. Fuse blown (10 A)
2. Bulb blown
3. Wiring harness disconnected or improperly
connected
4. Flasher unit damaged
5. Combination switch damaged
1. Bulb blown
2. Wiring harness disconnected or improperly
connected (between combination switch R or
L terminal and panel board)
1. Flasher unit damaged
Repair wire harness
or other
Replace bulb
Repair or replace
connector and wire
harness
Replace flasher unit
Replace hazard
switch
Replace bulb
Repair or replace
connector and wire
harness
Replace flasher unit
Repair wire harness
or other
Replace bulb
Repair or replace
connector and wire
harness
Replace flasher unit
Replace combination
switch
Replace bulb
Repair or replace
connector and wire
harness
Replace flasher unit
9-S5
ELECTRICAL SYSTEM
Reference
Solution
Page
G-40,
9-M1 to
9-M3
G-41
9-M1 to
9-M3
9-S28
9-S26
G-41
9-M1 to
9-M3
9-S28
G-40,
9-M1 to
9-M3
G-41
9-M1 to
9-M3
9-S28
9-S22
G-41
9-M1 to
9-M3
9-S28
KiSC issued 03, 2014 A