Setting The 3-Point Hitch - Kubota M7132 Operator's Manual

K-MONITOR MAIN MENU (PREMIUM AND PREMIUM KVT MODEL ONLY)

5. Setting the 3-point hitch

On the following menu, the 3-point hitch height and lowering speed, draft and position control, and ride control can be
preset.
With the optional radar device in place, the slip control is also enabled.
(1) 3-point hitch lock indicator
(2) 3-point hitch status indicator
(3) Ride control indicator
(4) Auto draft mode indicator
(5) Wheel slip control indicator
(6) 3-point hitch lock switch
Switching between 3-point hitch lock and unlock
Touch the left half of the 3-point hitch lock switch (6), and the 3-point hitch gets locked. A touch on the right half
unlocks the 3-point hitch.
While it is locked, the indicator (1) lights up and stays on.
Adjusting the lift arm top limit control (17)
Touch the "Plus (+)" switch (10) or the "Minus (-)" switch (11) on the right side of the lift arm top limit control (17) to
readjust the top limit height.
Raise the percentage to increase the top limit.
When it has reached 100%, the top limit setting is cancelled.
Adjusting the lift arm bottom limit control (15)
Using the depth control dial, the bottom limit height can be readjusted.
Lower the percentage to decrease the bottom limit.
When the auto draft mode switch (8) is ON, the lower link lowering position varies according to the draft sensitivity
control (13) setting value.
Displaying the lift arm height (16)
The current lift arm position (height) is automatically displayed with the bar graph and percentage.
A higher percentage shows a higher 3-point hitch height.
Adjusting the 3-point hitch lowering speed control (14)
Extend the graph farther to the right (raise the percentage) to increase the lowering speed.
Switching the automatic draft control
Touch the left half of the auto draft mode switch (8), and the automatic draft control gets activated. A touch on the
right half deactivates it.
M7132, M7152, M7172
(7) Ride control switch
(8) Auto draft mode switch
(9) Wheel slip control switch
(10) Plus (+) switch
(11) Minus (-) switch
(12) Wheel slip control
INTELLIPANEL
(13) Draft sensitivity control
(14) 3-point hitch lowering speed control
(15) Lift arm bottom limit control
(16) Lift arm height control, current position
(height)
(17) Lift arm top limit control
™
CONTROL
85