Kubota WSM B2050 Workshop Manual page 53

B2050, B2350, B2650, B3150, WSM
Checking Power Steering Line
1. Check to see that all lines and hose clamps are tight and not
damaged.
2. If hoses and clamps are found worn or damaged, replace or
repair them at once.
(1) Power Steering Pressure Hoses
Adjusting Air Conditioner Belt Tension
WARNING
To avoid personal injury or death:
• Be sure to stop the engine and remove the key before
checking.
1. Stop the engine and remove the key.
2. Apply moderate thumb pressure to belt between pulleys.
3. If tension is incorrect, loosen the tension pulley mounting nut
and turn the adjusting bolt to adjust the belt tension within
acceptable limits.
4. Replace air-conditioner belt if it is damaged.
Air conditioner belt
Factory specification
tension
(1) Adjusting Bolt
(2) Nut
Cleaning Inner Air Filter [CABIN HST Type]
1. Press the inner air filter and blow air from the direction opposite
to the filter's normal air flow.
2. Pressure of compressed air must be under 205 kPa
2
(2.1 kgf/cm , 30 psi).
(1) Inner Air Filter
G-32
GENERAL
9Y1210982GEG0042US0
A deflection of between 10
to 12 mm (0.39 to 0.47 in.)
when the belt is pressed in
the middle of the span
L: Deflection
9Y1210982GEG0043US0
(2) Screw
9Y1210982GEG0044US0
KiSC issued 03, 2014 A