Kubota WSM B2050 Workshop Manual page 286

B2050, B2350, B2650, B3150, WSM
Rear Axle Case (Manual Transmission Model)
1. Remove the brake rod (7) and parking brake rod (8).
2. Remove the oil filter bracket with oil filter (2) and suction pipe
(3).
3. Remove the spring (5) and plate (4).
4. Remove the differential lock rod (6) and check chain (9).
5. Remove the rear axle case (1).
(When reassembling)
• Do not damage the O-rings of delivery pipes.
• Apply liquid gasket (Three Bond 1206D or equivalent) to joint
face of the rear axle case and differential gear case after
eliminating the water and oil.
Rear axle case mounting
Tightening torque
screw
(1) Rear Axle Case
(2) Oil Filter
(3) Suction Pipe
(4) Plate
(5) Spring
Differential Lock Shift Fork
1. Remove the spring (1).
2. Draw out the differential lock clutch (3) and the differential lock
shift fork (2).
3. Remove the external cir-clip (6).
4. Remove the transmission oil filter bracket (7).
(1) Spring
(2) Differential Lock Shift Fork
(3) Differential Lock Clutch
(4) 57T Gear
4-S5
REAR AXLE
40 to 44 N·m
4.0 to 4.5 kgf·m
29 to 32 lbf·ft
(6) Differential Lock Rod
(7) Brake Rod
(8) Parking Brake Rod
(9) Check Chain
9Y1210982RAS0010US0
(5) Ball Bearing
(6) External Cir-clip
(7) Transmission Oil Filter Bracket
9Y1210982RAS0005US0
KiSC issued 03, 2014 A