Kubota WSM B2050 Workshop Manual page 234

B2050, B2350, B2650, B3150, WSM
Step (Manual Transmission Model)
1. Disconnect the accelerator rod (1).
2. Remove the return spring (2).
3. Remove the pin (3) and disconnect brake rod (4) from brake
pedal (5).
4. Remove the both side steps (6).
(When reassembling)
• Be sure to adjust the brake pedal free travel and parking brake
lever travel.
(1) Accelerator Rod
(2) Return Spring
(3) Pin
Step (HST Model)
1. Remove the HST pedal (1).
2. Remove the return spring (2).
3. Remove the pin (3) and disconnect brake rod (4) from brake
pedal (5).
4. Disconnect lever (6) from brake pedal (5).
5. Remove the both side steps.
(When reassembling)
• Be sure to adjust the brake pedal free travel and parking brake
lever travel.
(1) HST Pedal
(2) Return Spring
(3) Pin
Main Frame and Sub Frame
1. Remove the main frame bolts (1).
2. Remove the both side sub frames (2).
(When reassembling)
Sub frame mounting bolt
(M10)
Sub frame mounting bolt
(M12)
Tightening torque
Sub frame mounting nut
(M14)
Sub frame mounting bolt
(M14)
(1) Bolt
3-S22
TRANSMISSION
(4) Brake Rod
(5) Brake Pedal
(6) Step
9Y1210982TRS0117US0
(4) Brake Rod
(5) Brake Pedal
(6) Lever
9Y1210982TRS0118US0
40 to 46 N·m
4.1 to 4.6 kgf·m
30 to 33 lbf·ft
80 to 90 N·m
8.2 to 9.1 kgf·m
59 to 66 lbf·ft
100 to 126 N·m
10.2 to 13.0 kgf·m
73.8 to 94.4 lbf·ft
126 to 150 N·m
12.9 to 15.2 kgf·m
93.0 to 110 lbf·ft
(2) Sub Frame
9Y1210982TRS0119US0
KiSC issued 03, 2014 A