Differential Gear - Kubota WSM B2050 Workshop Manual

B2050, B2350, B2650, B3150, WSM

(6) Differential Gear

Clearance between Shift Fork and Shift Gear Groove
1. Insert the fork into the shift gear groove and measure the
clearance with a feeler gauge.
2. If the clearance exceeds the allowable limit, replace it.
Factory specification
Clearance between shift
fork and shift gear
groove
Allowable limit
Clearance between Differential Case (Spiral Bevel Gear) and
Differential Side Gear
1. Measure the differential side gear boss O.D. with an outside
micrometer.
2. Measure the differential case I.D. and the spiral bevel gear I.D.
with an inside micrometer, and calculate the clearance.
3. If the clearance exceeds the allowable limit, replace damage
parts.
Clearance between
Factory specification
differential case (spiral
bevel gear) and
Allowable limit
differential side gear
Differential case I.D. Factory specification
Spiral bevel gear I.D. Factory specification
Differential side gear
Factory specification
O.D.
3-S63
TRANSMISSION
0.10 to 0.35 mm
0.004 to 0.014 in.
0.5 mm
0.020 in.
9Y1210982TRS0111US0
0.025 to 0.066 mm
0.0010 to 0.0025 in.
0.30 mm
0.0118 in.
32.000 to 32.025 mm
1.2599 to 1.2608 in.
32.000 to 32.025 mm
1.2599 to 1.2608 in.
31.959 to 31.975 mm
1.2582 to 1.2589 in.
9Y1210982TRS0112US0
KiSC issued 03, 2014 A