Kubota WSM B2050 Workshop Manual page 118

B2050, B2350, B2650, B3150, WSM
Accelerator Rod, Power
Connectors and Others (Right Side)
1. Disconnect the accelerator rod (1).
2. Remove the clamp (2). In case HST model, disconnect the
power steering hose 2 (11) and pipe (12) at Bi-speed case side.
3. Disconnect the power steering hose (3), hydraulic delivery pipe
(4) and hydraulic inlet hose (5).
4. Disconnect the fuel hoses (6).
5. Disconnect the connectors (7) and glow plug harness (10).
6. Remove the shuttle plate (8).
7. Disconnect the clamp (9).
Tightening torque Power steering hose 2
(1) Accelerator Rod
(2) Clamp
(3) Power Steering Hose 1
(4) Hydraulic Delivery Pipe
(5) Hydraulic Inlet Hose
(6) Fuel Hose
(7) Connector
1-S29
Steering Hose, Fuel
24 to 28 N·m
2.5 to 2.8 kgf·m
18 to 20 lbf·ft
(8) Shuttle Plate
(9) Clamp
(10) Glow Plug Harness
(11) Power Steering Hose 2
(12) Pipe
[A] HST Model
9Y1210982ENS0120US0
KiSC issued 03, 2014 A
ENGINE
Hoses,