Kubota WSM B2050 Workshop Manual page 42

B2050, B2350, B2650, B3150, WSM
Checking Wheel Mounting Nuts Tightening Torque
WARNING
To avoid personal injury or death:
• Never operate tractor with a loose rim, wheel or axle.
• Any time bolts and nuts are loosened, retighten to
specified torque.
• Check all bolts and nuts frequently and keep them tight.
1. Check wheel bolts and nuts regularly especially when new. If
they are loose, tighten them as follows.
Front wheel mounting nut
Rear wheel
mounting nut
and screw
Tightening torque
Rear wheel
mounting nut
Rear wheel
mounting
screw
(1) Front Wheel Mounting Nut
G-21
GENERAL
77 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
B2050 108 to 126 N·m
B2350 11.1 to 12.8 kgf·m
B2650 79.7 to 92.9 lbf·ft
167 to 191 N·m
17 to 19.5 kgf·m
123 to 141 lbf·ft
B3150
196 to 225 N·m
20 to 23 kgf·m
145 to 166 lbf·ft
(2) Rear Wheel Mounting Nut and Bolt
9Y1210982GEG0025US0
KiSC issued 03, 2014 A