Kubota WSM B2050 Workshop Manual page 48

B2050, B2350, B2650, B3150, WSM
Adjusting Brake Pedal
WARNING
To avoid personal injury or death:
• Stop the engine and chock the wheels before checking
brake pedal.
• Be sure that the difference is 5 mm (0.2 in.) or less, when
the right and left brake pedals are depressed. If the
difference is large, the brake pull to one side when braking,
and cause an accident.
1. Slightly depress the right and left brake pedals and measure
free travel at the top of pedal stroke.
2. If adjustment is needed, turn the lock nut and adjust nut, adjust
free travel.
3. Retighten the lock nut.
4. Check to see that the difference is 5mm or less, when the right
and left brake pedals are depressed.
Proper brake pedal free travel
(1) Brake Pedal
(2) Brake Lever (Both Sides)
(3) Adjust Nut (Both Sides)
(4) Lock Nut (Both Sides)
G-27
GENERAL
ROPS: 30 to 40 mm (1.2 to 1.5 in.) on
the pedal
CAB: 20 to 30 mm (0.79 to 1.1 in.) on
the pedal
Keep the free travel in the right and left
brake pedals equal.
[A] ROPS HST Type
[B] ROPS Manual Transmission Type
[C] CAB HST Type
A: Free travel
B: Pedal stroke
C: Deference of the right and left
pedals is 5mm or less at position
9Y1210982GEG0032US0
KiSC issued 03, 2014 A