Kubota WSM B2050 Workshop Manual page 263

B2050, B2350, B2650, B3150, WSM
PTO Clutch Spring
1. Set the PTO clutch spring compressor (1) to the PTO clutch
case (2).
2. Tighten the nut and remove the external cir-clip (3).
3. Remove the spring collar (4) and the PTO clutch spring (5).
(1) PTO Clutch Spring Compressor
(2) PTO Clutch Case
(3) External Cir-clip
PTO Clutch Disks and Brake
1. After removing the inner cir-clip (7) from the PTO clutch case
(11), remove the pressure plate (6).
2. Remove the clutch disks (4) and clutch plates (3).
3. Remove the external cir-clip (17) from the spline boss (5).
4. Remove the brake plate (16), the brake disks (15) and the brake
plate (14).
5. After removing the external cir-clip (9), remove the spring collar
(8) and the spring (19).
(When reassembling)
• Install the parts to the original positions.
(1) Clutch Piston
(2) O-ring
(3) Clutch Plate
(4) Clutch Disk
(5) Spline Boss
(6) Pressure Plate
(7) Internal Cir-clip
(8) Spring Collar
(9) External Cir-clip
(10) Ball Bearing
3-S51
TRANSMISSION
(4) Spring Collar
(5) PTO Clutch Spring
9Y1210982TRS0081US0
(11) PTO Clutch Case
(12) Cir-clip
(13) Ball Bearing
(14) Brake Plate
(15) PTO Brake Disk
(16) Brake Plate
(17) External Cir-clip
(18) Bearing Collar
(19) Spring
9Y1210982TRS0082US0
KiSC issued 03, 2014 A