Kubota WSM B2050 Workshop Manual page 245

B2050, B2350, B2650, B3150, WSM
Removing and Disassembling
Assembly
1. Remove the rear PTO shifter (23) from the PTO clutch shaft
(22).
2. Disassemble the mechanical PTO clutch assembly.
(When reassembling)
• Check the mechanical PTO clutch assembly parts the damage
and wear, replace it.
(1) Cir-clip
(2) Needle Bearing
(3) Thrust Ball Bearing
(4) Shifter (PTO ON/OFF)
(5) Clutch Spring
(6) Brake Plate
(7) Brake Plate 3
(8) Brake Disk
(9) Brake Plate 1
(10) One-way Clutch Spline Boss
(11) Cir-clip
(12) Thrust Collar
3-S33
TRANSMISSION
Mechanical PTO
(13) PTO Brake Spline Boss
(14) Needle Bearing
(15) Thrust Collar
(16) Cir-clip
(17) PTO Shifter
(18) 25T Mid PTO Gear
(19) Needle Bearing
(20) Collar
(21) Ball Bearing
(22) PTO Clutch Shaft
(23) Rear PTO Shifter
9Y1210982TRS0055US0
KiSC issued 03, 2014 A
Clutch