Starter; Key Stop Solenoid - Kubota WSM B2050 Workshop Manual

B2050, B2350, B2650, B3150, WSM

[4] STARTER

The starter is a reduction type.
The reduction system is used planetary gears, and the speed of gear shaft (6) is reduced to approximately one
fifth of the armature shaft (8).

[5] KEY STOP SOLENOID

Flowing of the battery current into the fuel cut off
solenoid, the plunger (2) move to left side so that the
movement of control rack (4) becomes free. When the
battery current stops, the plunger (2) is returned to the
original position by the spring to keep the control rack (4)
in "No fuel injection" position.
(1) Key Stop Solenoid
(2) Plunger
9-M14
ELECTRICAL SYSTEM
(1) Housing
(2) Magnetic Switch
(3) Overrunning Clutch
(4) Drive Lever
(5) Internal Gear
(6) Gear Shaft
(7) Planetary Gear
(8) Armature Shaft
(9) Yoke
(10) Brush Holder
(11) Rear End Frame
9Y1210982ELM0019US0
(3) Injection Pump
(4) Control Rack
9Y1210982ELM0020US0
KiSC issued 03, 2014 A