Kubota WSM B2050 Workshop Manual page 237

B2050, B2350, B2650, B3150, WSM
Steel Plate
1. Remove the steel plate mounting bolts (1).
2. Remove the steel plate (2) from the flywheel.
• Apply liquid gasket (Three Bond 1206D or equivalent) to the
joint face of the engine and the front case.
Steel plate mounting bolt
Tightening torque
(M8)
(1) Steel Plate Mounting Bolt
(2) Steel Plate
Bi-Speed Turn ON-OFF Valve and Front Case Rear Cover
1. Remove the Bi-Speed Turn rod 1 (1), the Bi-Speed Turn
ON-OFF valve (5) and the Bi-Speed Turn Valve (6).
2. Remove the connecting pipe (4).
3. Remove the front case rear cover mounting bolts 2) and the
front case rear cover (3).
(When assembling)
• Check the oil seals and the O-ring for damage.
(1) Bi-Speed Turn Rod 1
(2) Bolt
(3) Front Case Rear Cover
(4) Connecting Pipe
(5) Bi-Speed Turn ON-OFF Valve
(6) Bi-Speed Turn Valve
(7) Delivery Pipe
3-S25
TRANSMISSION
23.6 to 27.4 N·m
2.4 to 2.8 kgf·m
17.4 to 20.2 lbf·ft
(3) Flywheel
9Y1210982TRS0043US0
(8) Front Wheel Drive Shaft 1
(9) Front Case
(10) Clutch Shaft
(11) Plug
(12) Spring
(13) Oil Seal
(14) Oil Seal
9Y1210982TRS0044US0
KiSC issued 03, 2014 A