Kubota WSM B2050 Workshop Manual page 231

B2050, B2350, B2650, B3150, WSM
Front Loader Cables
1. Loosen the lock nuts (3) and remove the front loader cables (4).
(When reassembling)
• Set the lock lever (2) to lock position.
• Fix the ball joint (1) first.
• Adjust the length of the front loader cable (4) outer section so
that the cable inner section has no play, and tighten the lock nut
(3).
(1) Ball Joint
(2) Lock Lever
Universal Joint Mounting Bolt and Bi-speed Rod
1. Remove the universal joint mounting bolt (2).
2. Disconnect the Bi-speed rod (3).
(When reassembling)
Universal joint mounting
Tightening torque
bolt
(1) Universal Joint
(2) Bolt
Electric Wiring
1. Disconnect the wiring connectors (1).
(1) Wiring Connector
Brake Pedal Rods
1. Disconnect the both left and right sides brake pedal rods (1).
(1) Brake Pedal Rod
3-S19
TRANSMISSION
(3) Lock Nut
(4) Front Loader Cable
9Y1210982TRS0017US0
24 to 28 N·m
2.5 to 2.8 kgf·m
18 to 20 lbf·ft
(3) Bi-speed Rod
9Y1210982TRS0018US0
9Y1210982TRS0019US0
9Y1210982TRS0020US0
KiSC issued 03, 2014 A