Timer Operation - Panasonic S-45PU1E5 Technical Data & Service Manual

8-5. Timer Operation

When setting the timer, make sure the current time on the remote control is accurate.
The timer's clock can only be set when the display of the remote control is ON.
After setting the timer, put the remote control in a place where its signal will reach the
receiver of the indoor unit. (When the time set for the timer is reached, a signal is sent
from the remote control to Start/Stop the unit.)
Using the Timer
1. Press either / of the
if you press
/ again, a scheduled time can be set.
The time last set on the timer is displayed.
"--:--" indicates time to change the batteries.
2. Press either of the
/
Every time you press
/
If you press and hold the button, the time changes quickly.
3. After setting the timer, if you press
indicating settings are complete.
After the timer setting is displayed for three seconds, the display reverts to the current time.
Combining ON and OFF Timers
Setting the ON and OFF timers, respectively.
Checking the timer setting
If you press either / for the
When no timer setting has been made, it displays --:--. (Initial Setting)
Changing a timer setting
Press / for the or the
Canceling a timer setting
If you press [CANCEL], the timer setting is canceled.
If you wish to cancel the setting for either the
scheduled time is displayed, press [CANCEL].
Using the same timer setting every day
If you press for 2 or more seconds, "
at the same time every day.
If you press again for two seconds or more, "
or , and while the time is being displayed,
or and set the timer to the desired time.
, the time changes in 10 minute increments.
, the time you set changes to a steady display,
or the , the scheduled time is displayed for four seconds.
, and then when the timer setting is displayed, press
or the
" is displayed and the ON timer or the OFF timer will operate the unit
" goes off and the timer operates just once.
timer, press or the desired timer and when the
/
8-7
3 1,2
/ for the timer again.
8