Panasonic S-45PU1E5 Technical Data & Service Manual page 685

*2: 7-segment, 4-digit display for remote controller timer display
The connected unit Nos. are displayed as shown below, using the 7-segment 4-digit (
the colon.
Display for unit Nos. 1 – 20
Not lit Not lit
1
6
3 8
4 9
2 7
5 10
Lit Lit
Display for unit Nos. 21 - 40
Not lit Not lit
21 6 2
3 2 28
4 2 29
22 27
25 30
Lit Lit
The meaning of the colon display changes in the same way, allowing unit Nos. up to 80 to be displayed.
Sample displays of the unit Nos. of connected indoor units
• Display of unit No. 1
• Display of unit Nos. 1 and 2
• Display of unit Nos. 1, 2, and 3
• Display of unit Nos. 1, 2, 3, and 4
NOTE
The colon display (Unit Nos. 1 – 20, 21 – 40) changes automatically every 10 seconds.
(The display does not change if higher unit numbers do not exist.)
Pressing the
have not passed.
*3: The total compressor operating time is displayed
(in 1-hour units) using 8 digits.
• When the fi rst 4 digits are displayed, the top
point of the colon is lit.
• When the last 4 digits are displayed, the colon
points are not lit.
• The display of the fi rst 4 and last 4 digits
changes automatically every 10 seconds. It can
also be changed by pressing the
NOTE
With the outdoor unit maintenance remote controller (when connected to the outdoor unit), the unit remote controller
check functions will not operate.
Not lit Not lit
1 1 6 1
3 1 8 1
4 1 9 1
2 1 7 1
15 20
Lit Lit
Not lit Not lit
1 3 6 3
3 3 8 3
4 3 9 3
32 37
35 40
Lit Lit
button switches the display immediately to the next higher level, even if 10 seconds
button.
6-5
Meaning of display colon
— — —
is not displayed.
Meaning of display colon
— — —
A
10: <Total compressor operatin time>
) display and
—
—
B
(A) and (B) are displayed alternately.
6