Panasonic S-45PU1E5 Technical Data & Service Manual page 415

4-7. Final Procedure
Reinstall the removed part to be placed in its original position.
(See the section "4-2. Preparation Before Installation".)
Then install the accessory supplied side covers (L/R) on both
sides of the indoor unit.
Attach the supplied side plates.
Slide the covers from the front side and attach to the claws
of the latches.
Tighten the screws (supplied).
Attach the accessory supplied side covers.
Insert the side plates in the direction of the arrow and fix them
with 2 screws once you've removed.
Attach the air-intake grille.
When attaching the air-intake grille, perform the reverse
procedure to removing the grille.
Refer to the section "4-2. Preparation Before Installation".
Be sure to attach the safety string.
Close the air-intake grille and fix the claws of the latches with
the screws.
Safety string
Side plate
Screw
Attach
Side cover (accessory supplied)
Screw (accessory supplied)
Fig. 4-25
Fig. 4-26
( Ceiling )
Part Name Figure
Special
washer
Drain
insulator
Flare
insulator
Clamper
Full-scale
installation
diagram
Drain hose
Hose band
Side
cover (R)
Side
cover (L)
Screw
Operating
Instructions
Installation
Instructions
1-405
Q'ty Remarks
For temporarily suspending
4
indoor unit from ceiling
2 For drain hose joint
1 For gas tube joint
1 For liquid tube joints
For flare insulator
6
and wiring
For positioning
1
installation
For main unit + PVC
1
pipe joints
For drain hose
1
connection
(Packed in carton box)
1
For right side
(Packed in carton box)
1
For left side
2 For side cover (L/R)
1
1
1