Mix Active/Phase - GRAUPNER mx-20 Hott Programming Manual

MIX active/phase

Selecting mixers for fl ight phases
Using the arrow keys on the left or right touch pad, page
to the menu option ...
Fl. phase timers
Wing mixers
Free mixers
MIX active/phase
MIX-only channel
Dual mixer
Fl. phase timers
Helicopter mixer
Free mixers
MIX active/phase
MIX-only channel
Dual mixer
... on the multi-function list. Briefl y tap the center
key on the right touch pad to open this menu option.
MIX ACTIVE IN PHASE
LinearM1 6 EL
LinearM2 C1 EL
LinearM3 3
LinearM4 S EL
normal
The "free mixers" on the previous menu can be enabled
and disabled for specifi c fl ight phases. You therefore
have complete freedom in assigning specifi c mixers only
to specifi c fl ight phases.
Switch to your chosen fl ight phase and use the arrow
keys to page through this menu. The mixers on the
"Free mixers" menu are displayed in the center column.
Following the activation of the value fi eld by briefl y
tapping the center SET key on the right touch pad, if the
192 Detail program description - Control adjust
respective mixer is set to "--" by using the arrow keys on
the left or right touch pad, then this mixer is deactivated
in the fl ight phase shown at the bottom of the display
and, simultaneously, removed from the list on the "Free
mixers" menu:
MIX ACTIVE IN PHASE
LinearM1
LinearM2
LinearM3
LinearM4
If you "lose" a mixer in this way from the "Free mixers"
menu ...
M1
M3
SET
M4
M5
M6
yes
yes
... then you should either switch through the fl ight
yes
8
phases until it appears again ... or, alternatively, switch
yes
to this menu and temporarily reactivate the mixer you
SEL
are looking for:
M1
M2
M3
M4
M5
6 EL yes
C1 EL –––
3 8 yes
S EL yes
Speed SEL
6 EL 4
3 8
S EL 2
?? ??
?? ??
ty fr to
6 EL 4
Tr C1 EL C4
3 8
S EL 2
?? ??
ty fr to