GRAUPNER mx-20 Hott Programming Manual page 235

33124.mx-20 hott.1.en
Table of Contents

Advertisement

Time
RFID
ABCDEF12
firmware ver.
date
2011/08/01(Mo )
time
11:22:33s
SD-Card
If necessary, select this line with the arrow keys of the
left or right touch pad and the minute fi eld, if applicable.
After activation of the respective value fi eld by pressing
the central
SET
key of the right touch pad, the hour or
minute can be adjusted with the arrow keys of the right
touch pad. Pressing the central
SET
key of the right
touch pad again completes the respective entry.
Contrary to this, the seconds display cannot be directly
adjusted; it can only be restarted by briefl y pressing the
central
SET
key of the right touch pad with "00".
Notice:
If the transmitter is connected to a PC as described
on page 39, the date and time can also be set
through the PC program provided for the respective
product on the internet page at www.graupner.de.
The date and time are protected against data loss
due to power failure by a buffer battery for situations
like a battery change, see page 15.
SD card
RFID
1.234
firmware ver.
date
time
0MB
SD-Card
In this line the memory capacity of a memory card
inserted in the transmitter, if applicable, is shown in MB.
Depending on the memory capacity of the inserted
micro SD or micro SDHC memory card, it may take
several minutes until the correct value is shown after
switching on the transmitter.
available
firmware ver.
date
time
SD-Card
available
Display of the available storage space in MB.
As mentioned before, the display of the available
storage space – depending on the capacity of the
inserted memory card – does not appear until some time
has passed after switching on the display.
The display of the available storage space in relation to
the total memory capacity is shown in the line below:
ABCDEF12
1.234
2011/08/01(Mo )
11:22:33s
2048MB
As mentioned before, the display of the available storage
space – depending on the capacity of the inserted
memory card – does not appear until some time has
passed after switching on the display.
1.234
2011/02/01(Mo )
11:22:33s
2048MB
1234MB
date
2011/08/01(Mo )
time
11:22:33s
SD-Card
2048MB
available
1234MB
Detail program description - Control adjust
60%
235

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents