Copy / Erase; Erase Model; Copy Model  Model - GRAUPNER mx-20 Hott Programming Manual

Copy / Erase

Erase or copy model  model, copy from or to SD card, copy fl ight phases
Select the "Copy / Erase" menu with thearrow
keys of the left or right touch pad then briefl y press the
SET button.
Model select
Copy / Erase
Suppress menus
Suppress models
Base setup model
Model type

Erase model

Model select
Copy / Erase
Suppress models
Base setup model
Model type
Suppress: TOG
Select the "Erase model" sub-menu with the  arrow
keys of the left or right touch pad then briefl y press the
SET button.
Use the  arrow keys of the left or right touch pad to
select the model to be erased ...
Model select
Copy / Erase
Suppress models
Base setup model
Model type
Suppress: TOG
... now the next time the SET button is pressed, it will
prompt the confi rmation request ...
64 Detail program description - Copy / Erase
BASIC SETTINGS, MODEL
Mod.name STARLET
Stick mode
RF BIND n/a
RF transmit
... to appear. A NO response will cause the process to be
canceled and a return to the previous screen. Selecting
arrow keys of the left or
the YES response with the 
right touch pad followed by confi rmation of the selection
by briefl y pressing the SET button will erase the selected
model memory.
Attention:
This erase process cannot be undone. All data in the
selected model memory will be erased completely.
Notice:
If the currently active model memory is to be erased,
a model type "Winged" or "Heli" must be defi ned
immediately after the erase process. On the other hand,
if an inactive memory location is to be erased then it
will subsequently appear in the model select screen as
"  free  ".
Copy model  model
Select the "Copy model  model" sub-menu with the
 arrow keys of the left or right touch pad then press
1
the SET button.
n/a
OFF
Timer1
SEL
Timer2
Timer3
Lap time/tim tab
Lap Display
Select the model to be copied with the  arrow keys
of the left or right touch pad ...
TELEMETRY
TEL.RCV
SETTING & DATA VIEW
SENSOR SELECT
RF STATUS VIEW
VOICE TRIGGER
... whereby a second activation of the
right touch pad will allow the "Copy to model" window
for the destination memory to be selected with the
 arrow keys of the left or right touch pad and then
confi rmed with yet another press of the
canceled with the
is already occupied can be overwritten.
BASIC SETTINGS, MODEL
Mod.name
Stick mode
RF BIND
Rcv Ch Map
0:00 0s –––
0:00 0s –––
0:00 0s –––
–––
–––
SEL SEL
BIND. 1
SET button in the
SET button or
ESC button. A memory location which
GRAUBELE
1
bind n/a
R12 n/a
BD1 BD2