GRAUPNER mx-20 Hott Programming Manual page 223

TX VOLT:
MODEL TIME:
BATTERIETIME:
TIMER(GE.)TOP:
TIMER(GE:)CENTER:
TIME:
RECEIVER
After selection of the desired menu line with the arrow
keys  of the left or right touch pad ...
VOICE TRIGGER
REPEAT 5SEC
TRIG
VARIO
TRANSFER
RECEIVER
SENSOR
... and then pressing the central SET
touch pad, the selected submenu opens:
TEMP:
STRENGHT:
RX VOLT:
LOWVOLT:
Here, after selection of the desired line with the arrow
keys  of the left or right touch pad and then
pressing the central SET key of the right touch pad,
activate ( ) or deactivate ( ) the selected voice
trigger.
SENSOR
This line only appears if a sensor was fi rst activated in
the "SENSOR SELECT" submenu:
VOICE TRIGGER
REPEAT
TRIG
VARIO
TRANSFER
RECEIVER
SENSOR
If, for example, the "VARIO" sensor was selected, after
selection of the "SENSOR" line and then pressing the
central SET key of the right touch pad, the following
display appears:
3
1 ALTITUDE:
8
MAXALT:
MINALT:
VOLT MINIMUM:
key of the right
As described in the left column, you can also activate
( ) or deactivate (
line after pressing the central SET key of the right touch
pad.
Notice:
The selection made here is completely independent of
the "VARIO" voice triggers.
5SEC 3
1
8
) the voice trigger of the desired
Detail program description - Control adjust 223