Sensor Select - GRAUPNER mx-20 Hott Programming Manual

SENSOR SELECT

After selection of the desired menu line with the arrow
keys  of the left or right touch pad...
TELEMETRY
TEL.RCV rcv ch1
SETTING & DATA VIEW
SENSOR SELECT
RF STATUS VIEW
VOICE TRIGGER
... and then pressing the central SET
touch pad, the selected submenu opens:
SENSOR SELECT
RECEIVER
GENERAL MODULE
ELECTRIC AIR.MOD
VARIO MODUL
GPS
Here, after selection of the desired line with the arrow
keys  of the left of right touch pad and then
pressing the central SET key of the right touch pad,
activate ( ) or deactivate ( )the data output of the
sensor connected to a receiver with active telemetry
connection. It is only possible to select one sensor, e. g.:
SENSOR SELECT
RECEIVER
GENERAL MODULE
ELECTRIC AIR.MOD
VARIO MODUL
GPS
This selection is required to show the sensor in the "VOICE
TRIGGER" submenu and for the display of the telemetry
data in the corresponding graphic displays, page 32.
220 Detail program description - Control adjust
key of the right